Automatic Cross Cutting Machine IBV/600 M 1

This machine enables to square the first and final parts of big thickness strips and also the cut at programmable measure. The grinded table with belt is fixed on the structure made of electro-welded steel. The table carries a special rubber belt and it is resistant to wear. A special anticorrosive treatment is effected. The switch board is made of sheet steel, thickness 15/10 mm, painted with RAL 7032 paint, IP 55 protection level. The supplying unit is composed by a magnetothermic switch with shutter locking to avoid the opening of the switch board with tension. It can be restored after opening the shutter, in case of maintenance.

 

      - length of table with motorized belt mm 4000

       - disc diameter mm 550

       - shaft diameter for disc fixing mm 50

       - cutting unit motor power kW 11

       - cutting unit forwarding motor power kW 0,55

       - cutting speed electronic adjustment by inverter

       - belt forwarding motor power kW 1,5

       - digital instrument with possibility of repetition

         of 1 single measure of cut

       - electronic adjustment of belt speed

       - useful cut mm 600

       - useful thickness of working marble mm 150

         granite mm 40

       - disc motor number of revolutions marble-granite rpm 1450

       - water consumption l/min 30

       - total installed power kW 13


 

 

Created by Vecomp Web Agency | Powered by SelfComposer CMS