IBV/300 M

This machine allows to cut strips of marble and granite into tiles by means of diamond independent discs cooled with water. The electro welded structure of the machine is at breast of technical progress and guarantees high steadiness, accuracy of working and absence of vibration. The mechanical and electrical components of the machine guarantee high accuracy and reliability, even if used till high stress. The machine is supplied with parts manually lubricated according to the maintenance plans given to the customer. All linear axis are executed with side containment wheels. All the mechanical guides can be adjusted without clearance. Movement of single cutting units is on precision slides and runners at spheres recirculating system. All the water supply pipes, the nozzle and the disc casings are dimensioned in such a way that they guarantee the water flow for a good cooling of the cutting blade during the processing phases, a good quality of the cut and a long tool life. The machine has been provided with lifting or fixing grommets. They allow, together with ropes and lifting hooks, to lift the whole structure. The non-deformability of the parts is guaranteed during the unloading operation. The switch board is made of sheet steel, thickness 15/10 mm, painted with RAL 7032 paint, IP55 protection level. The supplying unit is composed by a magnetothermic switch with shutter locking to avoid the opening of the switch board with tension. It can be restored after opening the shutter, in case of maintenance. To guarantee the operator’s safety, an insulation transformer is installed inside for voltage 380V and output 48V for all the driving mechanisms. The thermal relays and the magnetothermics are dimensioned for every specific motor to protect them in case of anomalies.

       4 to 11 units of cut

       independent units of work

 

      - minimum distance between the discs mm 200

       - useful cut width mm 610

       - maximum workable thickness mm 30

       - diamond discs diameter mm 300

       - disc shaft diameter mm 50

       - operating head motor power kW 3,7

       - belt forwarding motor power kW 0,55

       - transversal forwarding motor power kW 0,55

       - displayed belt forwarding speed

 

Optionals:

Spindles with visualized and motorized movement

 

 

 

Created by Ebweb | Powered by SelfComposer CMS